Disclaimer
Please note, once printed or downloaded, articles cannot be updated. By bookmarking the article and continuing to access it online, you can be sure you are reading the most up-to-date information and that you are not in breach of copyright laws.
Blood results: an overview
Numbers everywhere! Interpreting blood results can feel like a whirlwind of confusion at first. The computer helpfully identifies a lot of these numbers as abnormal. Is this expected? Can we ignore them or do they point to an impending disaster?
Learning to interpret blood results could be compared to learning a musical instrument. When starting out, it’s all about the basics. And it feels awkward. How do you hold the instrument? How do you get a note out of the thing? Reading music seems impossible. But our skills gradually increase and the process becomes semi-automatic. Eventually, we may even read a composition fluidly, play with grace and barely think about individual steps.
This article was written in August 2024. Statements are not individually referenced, but many major hospital trust labs in the UK have their own pathology information website, which will provide further information and examples of units and reference ranges, if required.
The laboratory
In primary care, we may take the complexity and expertise in the laboratories for granted.
There are several processes running behind the scenes which are essential for high-quality, reproducible, reliable results.
These include sample transport and storage; turnaround times; lab environment; machine calibration, servicing and quality control; reagent management; patient identification; audit; and record-keeping.
Scientific principles
Why am I ordering this test?
There are several reasons we might order a test. For each tick we place in the box to request a test, we need to be clear about WHY we want the test, and be prepared to take ownership of the result (BJGP 2024;74:e133). Reasons include:
- A clinical issue which needs investigation, e.g. my patient is tired and pale – are they anaemic?
- A safety monitoring requirement for a drug, e.g. my patient is on a diuretic and I need to ensure the potassium is OK.
- A clinical or QoF target needs measuring, e.g. HbA1c.
- Someone else has asked me to get the test, e.g. preoperative. See below: follow-up!
How will the result change my management?
Related to the first question, we need to have a clear plan for what will happen when we get the results – like a mental flowchart.
For example, IF the haemoglobin is low THEN we will do the following….
We should avoid ‘fishing trips’: the patient looks unwell so I’m going to tick all the boxes to see what I can find. This is discussed in more detail below.
Do I know how to interpret the result?
A good rule of thumb is not to request a test unless you are prepared to interpret and own the result. How will you relay this information to the patient? What will be the implications?
Some blood tests will be part of a protocol, and there will be measures in place for other clinicians to manage the result, e.g. a healthcare assistant requests bloods in preparation for a cardiovascular disease review with the nurse.
Is it clear WHO will follow-up the result?
This will often be the person who is requesting the result.
Sometimes, it will be another member of the team, as seen in the example above when the healthcare assistant obtains a predefined list of blood tests before a chronic disease review appointment.
Sometimes, a secondary care clinician will write to us and ask us to perform certain blood tests. We won’t get into the politics here, but it is good practice that the person requesting the test (in this case, the hospital team) makes arrangements to follow-up (their) test or provide specific instructions on how to act on the result, e.g. check PSA annually and refer back to clinic if it is higher than 6.5.

What is normal?
The lab will provide a result, usually along with an upper and lower limit of normal (or ‘reference range’).
How are these limits set? What does ‘normal’ mean?
Normal limits are often based on a set of values from a healthy population. These values usually make a bell curve (normal distribution). Statistical methods are used to work out where the boundary between normal and abnormal should lie.
- Sometimes, the figures may be adjusted to a more targeted population, e.g. age or biological sex.
- Sometimes, we need to take other things into account, e.g. is the patient pregnant?
Furthermore, importance of the test sometimes influences where a ‘normal’ is defined, e.g. a pregnancy test has a sufficiently high value that minimises the chance of a false positive.
Another example is the FIT (faecal immunochemical test). When a FIT is done on an asymptomatic person, it can allow for more blood compared with a test performed on someone with symptoms. This is because individuals with symptoms are more likely to have an underlying issue so we need to examine them more carefully.
‘Normal’ and ‘target’ level may be different
Gout is a useful example. A lab reference range may be <450micromol/l, but we need to get the urate <360 to have a clinical impact. Thus, the result may be inadvertently filed as ‘normal’ if it is 400, but, in reality, we need to up-titrate our patient’s urate-lowering therapy (see our article Gout for more on this).
For example, Len had an MI last year. He is reluctant to take atorvastatin to lower his cholesterol because he can clearly see on his results that his cholesterol is normal. Of course, in secondary prevention, there is no ‘normal’. We have a clinical target, but the aim is to get LDL as low as possible.
The same applies in primary prevention of CVD. A patient may have a QRISK of 30% despite a healthy lipid profile. The risk reflects their age, sex, smoking and diabetes, but the answer may still involve a statin as part of the plan.
Trends
Declining trends may signal emerging issues, and may be obscured within the normal range.
Anna has heavy periods and has been tired. She thinks she might be anaemic. She had her haemoglobin checked 3 months ago and it was wonderful: 150g/L. Now, it is 122 g/L. She rings and is told her results are normal. She is not anaemic.
Will we spot this? It’s important to study trends as well as today’s result.
A sudden change for the worse
Occasionally, we see a sudden, very significant change in the blood results.
Why might this happen? There are several possibilities.
- Has anything has happened since your last sample on file, e.g. hip fracture and replacement?
- Has there been an acute illness or hospital admission?
- Has the patient had a blood transfusion?
- Have new drugs been started, e.g. a DMARD?
What should you do?
- Check the hospital results: you may find results which align more closely with those you are now seeing.
- Check the interval since the last result.
- How is the patient clinically?
- Consider a sample issue, e.g. high potassium in a sample that sat overnight.
If in doubt, assume the worst case and plan accordingly, e.g. do not assume a potassium of 6.5 is due to sample degradation!
Fishing trips and the dangers of over-investigation
In this sense, a fishing trip is the medical equivalent of bottom trawling: dragging a weighted net across the seabed to catch everything, then seeing what you found. The problem with a fishing trip is that you might find a red herring (BMJ 2023;382:e075728): Irrelevant, incidental positive findings which then lead to anxiety and a merry-go-round of unnecessary and costly onward tests and referrals.
Consider the case of Jill.

The common blood tests
There are a certain set of ‘core’ blood tests which cover most of the results you’ll see in primary care. You may have encountered the 80:20 rule: here, we think that around 80% of blood results you encounter likely come from around 20% of the tests available to order. We’re going to focus on this common 20% which we’ve identified.
What about the remaining 80%? The reality is that these will rarely be requested in primary care, if ever. There are dozens of them. You may not even have heard of some of them (we hadn’t)!
This table lists some of the more common blood tests, but is not exhaustive.
| Full blood count (FBC) | Urea and electrolytes (U&Es) | Thyroid function test (TFT) | Hepatitis serology (B & C) |
| Erythrocyte sedimentation rate (ESR) | Liver function test (LFT) | Parathyroid hormone (PTH) | HIV test |
| Plasma viscosity (PV) | Bone biochemistry | FSH and LH | Syphilis |
| HbA1c | Glucose | Sex hormones | PSA (prostate-specific antigen) |
| Creatine kinase (CK) | Lipid profile | C-reactive protein (CRP) | CA125 |
| Coagulation tests (PT and APTT) |
NT-proBNP and BNP (natriuretic peptides) |
Coeliac serology | ENA (extractable nuclear antibodies) |
| D-dimer | Rheumatoid factor | Anti-CCP | ANA (antinuclear antibodies) |
Next, we’ll list each test, what it might be used for and where to find further information. We won’t supply reference ranges because they can vary between labs, sometimes use different units and should be listed with your result.
Haematology tests
The FBC is one of the most common tests. It is analysed in the haematology lab. The full blood count blood (EDTA) sample deteriorates and will not store in primary care for any length of time. Ideally, it needs to be on its way to the lab within 4 hours or so.
The 3 key points on the FBC are:
- Haemoglobin (and MCV).
- White cells.
- Platelets.
A pancytopenia is when all 3 cell lines are reduced: red cells, white cells and platelets. This suggests there is something more fundamental going on, e.g. bone marrow suppression.
The lab may perform a blood film if they spot certain abnormalities such as fragments of red cells, spherocytes or white cell abnormalities. This is usually reported in free text at the end of your report. Suggestions may be made (further tests or recommendations for referral).
You may also be provided with a reticulocyte count. Reticulocytes are immature red blood cells and, if raised, may suggest the marrow is making lots of new red cells.
Hb and PCV relate to whole blood so, in states of dehydration or fluid overload, these values change. In dehydration, for example, water is missing, the blood is more concentrated and Hb and PCV rise. If the blood is ‘diluted’ with additional fluid, the Hb and PCV fall.
The table below lists the more important numbers on the FBC result. Many others are supplied, but, in primary care, these are the ones we take most notice of!

Common biochemistry tests
The following table covers the basic biochemistry tests, and signposts you to articles which have more detail about abnormalities.



![]() |
Blood results: an overview |
This information is for use by clinicians for individual educational purposes, and should be used only within the context of the scope of your personal practice. It should not be shared or used for commercial purposes. If you wish to use our content for group or commercial purposes, you must contact us at sales@red-whale.co.uk to discuss licensing, otherwise you may be infringing our intellectual property rights.
Although we make reasonable efforts to update and check the information in our content is accurate at the date of publication or presentation, we make no representations, warranties or guarantees, whether express or implied, that the information in our products is accurate, complete or up to date.
This content is, of necessity, of a brief and general nature, and this should not replace your own good clinical judgment or be regarded as a substitute for taking professional advice in appropriate circumstances. In particular, check drug doses, side effects and interactions with the British National Formulary. Save insofar as any such liability cannot be excluded at law, we do not accept any liability for loss of any type caused by reliance on the information in these pages.
Here is the link to our terms of use.
